ABS Filtration

When selecting a Melt Filtration System for a given application, it is important to consider not only the ability of the system to handle the contamination load which the recycled material brings – and to achieve the required filtration fineness, but also the impact of the system on the process consistency.

Our Promise:

• Increase yield by up to 4%
• No offgrade
• No quality fluctuations during screen changes
• No colour deviations in production
• Fast colour changes without material loss

You can find more information about our ABS solutions here: gneuss.com/en/abs-and-ps-sheet/

For an application example, click here:
gneuss.com/en/sfxmagnus-rotaryfilter-mp3-italy/

Gneuss RSFgenius Melt Filtration System for ABS production.
Perfect product quality ensured – constantly:

• Self-cleaning
  The self-cleaning system consists of an injection plunger, installed on the “clean” side of the rotary disc, on the outlet side. A measured shot of the filtered polymer is injected across the filter elements at a controlled, high pressure from the reverse side, in order to purge out the contamination which is resting on the filter element.
• Fully automatic
  The filtration system operates fully-automatically and ensures a 100% availability of the line. Depending on the contamination level, a screen change (which takes approx. 20-30 minutes) is carried out approx. every 1-16 weeks and has no influence on the production process and product quality.
• Constant pressure
  By always keeping the size of the active screen area constant, pressure, temperature, viscosity and throughput of the melt remain constant, which guarantees the highest end product quality.
• No interruptions
  Due to the very effective screen cleaning with high pressure impulses, screens are automatically re-used 100-400 times (depending on the filtration fineness).