DAI – melt pressure transducer with integrated amplifier

The DAI Series offers – in addition to maximum reliability – improved user friendliness in the form of an Auto-Zero Function for local or remote configuration.

These models offer mA and mV output signals for further processing. The popular and most commonly used 2-wire and 4-20mA configuration provide unequalled interference in critical environments.

Information sheet
PDF Download (347 KB)

Order specification (bar)
PDF Download (28 KB)

Order specification (psi)
PDF Download (33 KB)

Operating instructions
PDF Download (698 KB)

  • Interference resistant signals over long distances
  • Stable output signals
  • No damage due to incorrect wiring configurations
  • 3- and 4-wire technology available at no additional charge
  • Applications with process medias of up to 400°C (750°F) possible
  • Standard G-coating to counteract adhesive materials
  • Maximum reliability through new membrane technology

DTAI – pressure transmitter with integrated amplifier and integrated temperature measurement

The DTAI first of all offers the user the comfort of operating a DAI in combination with temperature measurement. One process connection suffices in order to measure both values.

These model offers mA and V output signals for further processing. The popular and most commonly used 2-wire and 4-20 mA configuration provide unequalled interference in critical environments.

Information sheet
PDF-Download (404 KB)

Order specification (bar)
PDF-Download (28 KB)

Order specification (psi)
PDF-Download (28 KB)

Operating instructions
PDF-Download (676 KB)

DTAI Parasolid data (x_t)

DTAI

DTAI 0.5 Zoll-20UNF with flexible capillary

Please download the standard sensor, before collecting the shaft length.

 
 
 
 
 
 
 
  • Liquid filled measuring system
  • Maximum reliability through new membrane technology
  • Standard G-coating to counteract adhesive materials
  • Combined pressure and temperature measurement
  • Robust design with G-Armor flexible components
  • Applications with process medias of up to 400°C (750°F) possible
  • Pressure ranges from 0-50 and 0-2.000 bar (0-725 to 29,000 psi) available
  • Interference resistant signals over long distances
  • Stable output signals

DAIP – pressure transmitter with integrated amplifier and heated sensor tip

The DAIP Series incorporates a heated sensor tip, which limits the potential for sensor damage relating to the membrane, resulting from installation or removal of the pressure transmitter. Additionally it offers the comfort of the DAI series in combination with temperature measurement, allowing for heater control.

The Gneuss patented heated sensor tip allows the sensor to be easily removed from a “frozen” melt without any problems. The diaphragm is not damaged when the polymer contracts. The DAIP has revolutionized the handling of critical medias, for example PC, PMMA or ABS.

Information sheet
PDF-Download (462 KB)

Order specification (bar)
PDF-Download (27 KB)

Order specification (psi)
PDF-Download (27 KB)

Operating instructions
PDF-Download (303 KB)

DAIP Parasolid data (x_t)

DAIP

DAIP 0.5 Zoll-20UNF with flexible capillary

Please download the standard sensor, before collecting the shaft length.

DAIP standard sensor (flex)

Shaft length 50 mm

Shaft length 76 mm

Shaft length 152 mm

Shaft length 203 mm

Shaft length 254 mm

Shaft length 318 mm

Shaft length 356 mm

Shaft length 457 mm

  • Heater with 24V
  • Patented technology
  • Maximum reliabilty through new membrane technology
  • G-coating to counteract adhesive materials
  • Robust design with G-Armor flexible components
  • Interference resistand signals over long distances
  • 3- and 4-wire technology available
  • With integrated amplifier 0-20 mA, 4-20 mA, or 0-10 V output